Abdolmaleki, Fatemeh
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2024, Pages 15-23]
Ahmadpour, Ghader
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Alhaji, Amir
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
Amirshekari, Solmaz
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
B
Bahamirian, Milad
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Banafatizadeh, Fatemeh
The Effect of Adding Different Percentages of γ-Glycidoxypropyltrimethoxysilane Cross-linker on the Properties of Freeze-dried Gelatin/Chitosan Scaffolds upon Introducing an Optimum Condition to Cross-link the Chitosan/Gelatin Scaffolds in Bone Tissue Engineering [Volume 12, Issue 2, 2023, Pages 39-54]
Borhan, Shokoufeh
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
D
Daneshmoghanlou, Elham
Design of a Polymer-grafted Graphene Oxide Based Drug Delivery System for Curcumin: Optimization Using RSM and Cytotoxicity study [Volume 12, Issue 2, 2023, Pages 13-28]
Davarpanah, Leila
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
Delshad Chermahini, Mehdi
Pseudocapacitive Performance of Binder-Free Nickel Hydroxide Electrode Prepared by Layer-by-Layer Chemical Deposition on Nickel Foam [Volume 12, Issue 1, 2023, Pages 17-28]
Dodange, Setare
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
E
Ebrahimi, Tahura
Fabrication and Characterization of Xanthan Film Containing Spirulina Extract with Continues Release Capability for Use in Wound Healing [Volume 12, Issue 4, 2024, Pages 1-14]
Eshraghi, Mohammad Javad
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Esmaeilzadeh, Javad
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
F
Fadaee, Reza
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
Farvizi, Mohammad
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Fereydoonpoor, Iman
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
G
Ghafoori, Danial
Fabrication of Zirconia Crucible Using Low-Pressure Injection Molding Process & Investigation of Effective Parameters [Volume 12, Issue 3, 2023, Pages 65-77]
Ghasemzadeh, Afrouz
Fabrication and Characterization of Xanthan Film Containing Spirulina Extract with Continues Release Capability for Use in Wound Healing [Volume 12, Issue 4, 2024, Pages 1-14]
H
Hadi, َAlireza
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
Hamta, Afshin
Investigation of the Effect of Different Parameters on the Separation of Lead, Arsenic, and Cadmium Ions from Wastewater using Aqueous Two-Phase Systems [Volume 12, Issue 2, 2023, Pages 29-38]
Hayati, Raziye
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
Heidari, Atousa
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
I
Imani, Rana
Fabrication and Characterization of Xanthan Film Containing Spirulina Extract with Continues Release Capability for Use in Wound Healing [Volume 12, Issue 4, 2024, Pages 1-14]
J
Jalali Bidakhavidi, Mahmood
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2024, Pages 38-47]
Jamali, Hossein
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
K
Karamdel, Javad
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
Kazazi, Mahdi
Pseudocapacitive Performance of Binder-Free Nickel Hydroxide Electrode Prepared by Layer-by-Layer Chemical Deposition on Nickel Foam [Volume 12, Issue 1, 2023, Pages 17-28]
Khanmohammadi, Erfan
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
Khojasteh Abbasi, Alireza
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
L
Loghman Estarki, Mohammad Reza
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
M
Majidian, Hudsa
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
Manavizadeh, Negin
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
Mansouri, Hojjatollah
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Mehdikhani, Ali
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2024, Pages 61-72]
Miralinaghi, Mahsasadat
Fabrication and Characterization of L-Glutamine-Functionalized Magnetic Graphene Oxide as a Novel Bio-Platform for Controlled Release of 5-Fluorouracil [Volume 12, Issue 4, 2024, Pages 24-37]
Miralinaghi, Mahsasadat
Design of a Polymer-grafted Graphene Oxide Based Drug Delivery System for Curcumin: Optimization Using RSM and Cytotoxicity study [Volume 12, Issue 2, 2023, Pages 13-28]
Mirzaei, Jaber
Fabrication of Zirconia Crucible Using Low-Pressure Injection Molding Process & Investigation of Effective Parameters [Volume 12, Issue 3, 2023, Pages 65-77]
Mirzakhani, Bahman
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
Mobasherpour, Iman
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Moniri, Elham
Design of a Polymer-grafted Graphene Oxide Based Drug Delivery System for Curcumin: Optimization Using RSM and Cytotoxicity study [Volume 12, Issue 2, 2023, Pages 13-28]
N
Nasirpouri, Farzad
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Nazemnezhad, Reza
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
O
Ognev, Alexey
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Okhovat Ghahfarokhi, Mehdi
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
Omidvar, Hamid
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2024, Pages 38-47]
P
Paydari, Pouya
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
Q
Qazi mirsaeid, Sayed Mahdi
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2024, Pages 15-23]
R
Raeisi, Babak
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
Rahimi Junaqani, Javad
Pseudocapacitive Performance of Binder-Free Nickel Hydroxide Electrode Prepared by Layer-by-Layer Chemical Deposition on Nickel Foam [Volume 12, Issue 1, 2023, Pages 17-28]
Rahimipoor, Mohammad Reza
Investigation of the Effect of Different Parameters on the Separation of Lead, Arsenic, and Cadmium Ions from Wastewater using Aqueous Two-Phase Systems [Volume 12, Issue 2, 2023, Pages 29-38]
Raissi Dehkordi, Babak
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
Rajaei, Hosein
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Rezaei, Mohammad Reza
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
Riahifar, Reza
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
Riahifar, Reza
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
S
Sahba Yaghmaee, Maziar
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
Sahba Yaghmaee, Maziar
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
Salahi, Esmaeil
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2024, Pages 61-72]
Salimi, Esmaeil
Synthesis of Bioactive and Biodegradable Gelatin/Wollastonite Nanocomposite for the Delivery of Gentamicin [Volume 12, Issue 4, 2024, Pages 48-60]
Salman Tabrizi, Nooshin
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
Samardak, Alexander
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Sardarian, Mehran
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Seifollahi, Masumeh
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2024, Pages 15-23]
Shabestari, Saeed
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
Shahmoradi, Jahangir
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2024, Pages 61-72]
Shahriari Kallemasihi, Masoumeh
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Sharifpour, Mohammad
Fabrication and Characterization of L-Glutamine-Functionalized Magnetic Graphene Oxide as a Novel Bio-Platform for Controlled Release of 5-Fluorouracil [Volume 12, Issue 4, 2024, Pages 24-37]
Shojaie, Fahimeh
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Sobhani, Ava
Synthesis of Bioactive and Biodegradable Gelatin/Wollastonite Nanocomposite for the Delivery of Gentamicin [Volume 12, Issue 4, 2024, Pages 48-60]
Z
Zakeri, Mohammad
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Zakeri, Mohammad
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
Zamanian, Ali
The Effect of Adding Different Percentages of γ-Glycidoxypropyltrimethoxysilane Cross-linker on the Properties of Freeze-dried Gelatin/Chitosan Scaffolds upon Introducing an Optimum Condition to Cross-link the Chitosan/Gelatin Scaffolds in Bone Tissue Engineering [Volume 12, Issue 2, 2023, Pages 39-54]
Zamanian, Ali
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2024, Pages 38-47]
Zareei, Hamidreza Rezaei
Fabrication of Zirconia Crucible Using Low-Pressure Injection Molding Process & Investigation of Effective Parameters [Volume 12, Issue 3, 2023, Pages 65-77]